I. Equipment Introduction

Carbon dioxide refilling machine, designed to fill CO2 from low-pressure large containers into high-pressure small containers by pressurization. Suitable for refilling 0.5L/1L/2L/3L/5L gas cylinders and reactors. The digital display allows setting the upper limit and lower limit pressures, achieving automatic start below the lower limit and automatic stop above the upper limit.

II. Applicable Scope

High-pressure filling and refilling of CO2 cylinders

High-pressure filling and refilling of N2O cylinders

Carbon dioxide autoclave high-pressure injection

Carbon Dioxide High-Pressure Cleaning

III. Main Technical Parameters：

1. Filling Medium: Liquid Filling (Gas Source from 40L Seamless Steel Cylinder/Absolute Steel Cylinder)

2. Filling Pressure: 15 MPa

3. Filling Weight: 0.3-1.7 kg (pressure set as required)

4. Import Dimensions: Cylinder Fitting

5. Interface Size: Available with quick connectors for small gas cylinders or custom-made connectors

6. Drive Interface: 12MM PU Soft Tube Quick Connect Interface

7. Drive Requirements: Compressed air 0.6-0.8 MPa, 0.7 m³/min

8. Power Voltage: 220V

Section 4: Brief Operation Steps

1. Connect gas, power, and CO2 sources
2. Inflated Cylinder Connector
3. Set filling pressure
4. Press the [Start] button to begin the filling process.
5. Fills and automatically stops upon reaching the set pressure.
6. Close the [Filling Valve]
7. Remove the filling component and replace it with another filling component.
8. Open the [Filling Valve], and the equipment will automatically start filling.

This equipment is a non-standard product. Specific parameters, dimensions, and pricing are subject to the technical requirements.