Equipment Introduction
Water pressure test bench for pressure-bearing components' pressure resistance and burst tests. The entire equipment consists of three main parts: PLC control section, pressure boost power source section, and test chamber section. The PLC controls the entire testing process, allowing for free setting of various test parameters, such as test pressure, holding time, and allowable pressure drop. High-precision pressure transmitters are used to collect real-time pressure values, which are then sent through the pressure control system to the pressure-bearing components inside the test chamber via high-pressure pipelines for static and burst tests. This evaluates the sealing and pressure resistance performance of the pressure-bearing components.
Application Scope
Pressure Strength Burst Tests and Destructive Tests for various products including hoses, rubber hoses, hydraulic hoses assemblies, compressor casings, automotive hoses, metal piping, oil pipelines, steering hoses for vehicles, brake lines, air conditioning lines, fuel lines, coolant water lines, radiators, heating and air conditioning hoses, hydraulic equipment, condensers, evaporators, air conditioning filter element hoses, turbocharger system hoses, automotive brake pumps, cylinder blocks, engineering hydraulic hoses, aviation hoses and fittings, rigid pipes, connectors, valves, pressure gauges, pressure vessels, pressure transmitters, etc.
Technical Specifications:
1. Test Functions: Voltage Resistance Test, Burst Test
2. Test Pressure: 2.5 MPa, 4 MPa, 6 MPa, 10 MPa, 25 MPa, 40 MPa, 60 MPa, 100 MPa, 120 MPa, 150 MPa, 240 MPa, 300 MPa, 400 MPa
3. Verification of Medium: Water, hydraulic oil, or as agreed by the customer
4. Test Station: 1 station
5. Measurement Accuracy: 0.5% FS
6. Control Method: Manual
7. Drive Pressure: 5-8 bar
Power Source: 220V 50Hz
9. Operating Environment Temperature: Room Temperature
Features of the Equipment
All components are mounted in a sealed box structure, featuring a simple design and secure connections. The control panel is located at the front, making it easy to observe and operate.
PLC control, automatically increasing pressure, holding pressure, and releasing load according to set pressure.
The C machine is equipped with an internal mechanical pressure switch, and the output pressure can be set via an air switch. The booster automatically shuts off when the output pressure reaches the set value.
The unit is equipped with an internal high-pressure one-way valve and filter, ensuring safety and reliability.
The control unit is simple, utilizing pneumatic control throughout, ensuring safety and reliability.
Low maintenance costs, good economic performance.
