Silent 250A diesel generator and welding dual-use machine
Welding machine factory, the advantages of this type of welding machine are high combustion efficiency and high economic benefits. Easy and safe welding: can be used anytime, anywhere. You can work 24 hours a day. Stable automatic voltage regulation system and welding protection device. It is safe to use. The Dazhe power engine used has stable and reliable arc welding operation, with leakage protection function, safe use using closed-loop control, simple circuit structure, easy maintenance, and low failure rate. The output power is 5 kilowatts, with constant welding of 4.0 electrodes and short-term welding of 5.0 electrodes.
Model: TO250A
Generator parameters
Rated power: 5KW
Backup power: 6KW
Rated frequency: 50HZ
Rated voltage: 220V
Power factor: 1.0
Number of phases: single-phase
Welding machine parameters
Welding module: automatic welding module
No load voltage: 65V
Welding voltage: 22-30V
Welding rod range: 0-5.0mm
Current regulation: 0-250A
Welding machine grade: industrial grade
Welding continuity rate: 100%
Welding current: inverter DC welding machine
engine parameters
Engine model TO192
Engine type: Single cylinder air-cooled diesel engine
Piston displacement: 420CC
Power speed: 15HP/3000kpm
Startup method: manual/electric startup
Lubricating oil volume: 1.1L
Fuel consumption 205g/kw. h
Fuel type: diesel
Other parameters
Unit size: 760 * 520 * 680
Structure type: Open frame/Hand push
72 at a noise level of 7M
Fuel tank capacity: 25L
Battery: 12-8.3V-Ah
Net weight: 102
The standard configuration of the generator welding unit is as follows
Voltage, welding current regulation, frequency, machine operation indication, cooling fan, safety protection:
Start the battery and the battery starting connection cable;
Welding rod functions: 506, 507, ordinary welding rod, cellulose welding rod, alkaline welding rod, low hydrogen welding rod, carbon welding rod, stainless steel welding rod, etc.
Usage conditions: Environment -35-55 degrees Celsius: altitude within 2000 meters.
TO Daze diesel engine: dustproof, sand proof, shock resistant, and has good environmental adaptability!
Auxiliary power: 5KW/50HZ auxiliary power output, can be equipped with lighting, handheld drill, water pump, etc.
Optional accessories (additional cost)
High frequency diesel welding machine TO rare earth permanent magnet motor
High altitude fuel injection pump 4000-6000 meters high power version TO engine
Execution standard: International standard certification ISO9001:2000 Industry execution standard GB/T2820.1997
Connect the power, turn on the switch, clamp the electrode, adjust the current, and start working. Basically, it is important to protect your eyes, hands, and feet, even if the injury is not very serious. For resistance welding, electroslag welding, and automatic welding, it is necessary to protect your eyes completely with masks, gloves, and clothing. In good conditions, the ground should turn right during welding current.
