Cable-through fiber-glass impregnated dry-type transformer bushing

Product Introduction

This product consists of a carrier body, a capacitor core wrapped with impregnated fiber, a composite jacket/wire enamel jacket, flange, and end structure. Measurement terminals are provided on the flange, which should be opened for use during partial discharge and dielectric loss factor measurements, and should be reliably grounded during normal operation. The outdoor end of the product features equipment clamps.

Reference Standards

·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"

Product Model

Product Features

· Dry-type composite capacitive insulation, oil-free, airless

High resistance to soiling

· Good mechanical properties of casing

Terms of Use:

·Ambient Temperature: -40℃ to +50℃

·Altitude: Product design is based on 1000m altitude; when exceeding 1000m, adjustments are made according to GB 311.

·Contamination Level: IV (Special requirements to be noted if applicable)

Key Performance Indicators:

· Applicable rated voltage levels: 12~252 kV

Rated Current: ≤6300A (Special design required for higher current if needed)

Insulation Level