Heavy-duty Martin sweeper

Conveyor Spring Cleaner Installation Steps

Insert the assembled sweeper blade, blade holder, and telescopic rod into the center hole of the fixed bracket.

2. Thread the sweeper tensioner bracket through the exposed telescopic rod and securely fasten it to the mounting bracket with screws.

3. Please provide the Chinese content for translation.SweeperDamping rubber sleeves (black) and friction-reducing nylon sleeves (white) are individually inserted into the telescopic rod sections

4. First, thread the screw into the pivot pillar of the tensioner support bracket, then individually insert the locating washer and R pin into the pivot pillar.

5. First, insert the tension arm of the first cleaning brush into the telescopic rod, then thread the screw into the flat hole of the arm.

6. First, individually insert the scale indicator plate, spring holder, spring, and flat washer into the screw, tightly against the arm. Then, tighten the tension nut into the screw about two turns.

7. Blade flips flat against belt

8. Arm, scale indicator plate, spring seat, spring, flat washer - gapless tight against the tension nut

9. Secure the top bolts on the stabilizer arm (3 bolts per arm)

10. Adjust the tension nut, apply the appropriate tension force (adjust according to working conditions), and engage the anti-backoff nut.