Product Details
价 格Negotiable
最小起订0 Piece库存0 Piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Japanese Magnescale Magnetic Scal
Negotiable
Mitutoyo Standard ID Gauge 511-71
Negotiable
Japan Magnescale Displacement Sen
Negotiable
Mitutoyo SAE Bore Gage 526-163-21
Negotiable
Mitutoyo's Sanfeng Force Gauged D
Negotiable
Japan Magnescale Displacement Sen
Negotiable
Japan Magnescale Reading Head PL8
Negotiable
Japanese Magnescale Magnetic Scal
Negotiable
Japanese Magnescale Reading Head
Negotiable
Mitutoyo 3D Glass Thickness Gauge
Negotiable
Japan Magnescale Caliper Sensor DK805SBFLR
Measurement Range: 5mm, 12mm, 30mm
Resolution: 0.1µm, 0.5µm
Accuracy: 1µm p-p to 1.7µm p-p (varies by model)
Response Speed: 80m/min at 0.1µm resolution, 250m/min at 0.5µm resolution
Ball bearing structure: High durability ball spline bearing used, enhancing sliding performance
Swipes: Over 320 million or more (Testing continues as of January 2021)
Protection Level: Supports IP67 (Straight/Right-angled with气管 installed)
Built-in origin
Output Signal: A/B Phase (Pulse), Origin (Differential Line Driver Signal with Output Voltage)
Available with flanges for secure attachment.
| Key Specifications | ||
|---|---|---|
※1 Items marked with (*) are type B ※2 Excludes the inner box and connector parts ※3 Right-angled and φ4mm tube used ※4 Excludes cable parts and internal sockets ※5 The shapes and sizes of certain parts are different from the previous DK800 series models. Changes to the recorded content will be made without prior notice. | ||
| Model | High-resolution model | Universal Resolution Type |
| DK805SAR，DK805SALR，DK805SAFR，DK805SAFLR DK805SBR，DK805SBLR，DK805SBFR，DK805SBFLR | DK805SAR5，DK805SALR5，DK805SAFR5，DK805SAFLR5 DK805SBR5，DK805SBLR5，DK805SBFR5，DK805SBFLR5 | |
| Measurement Range | 5mm | |
| Resolution | 0.1µm | 0.5µm |
| Accuracy (at 20℃) | 1µm p-p | 1.5µm p-p |
| Measurement Force (at 20℃) | Up: 0.35 ± 0.25 N | |
| Horizontal: 0.40 ± 0.25 N | ||
| Down: 0.45 ± 0.25 N | ||
| Operating Temperature Range | 0 ~ +50℃ (No condensation allowed) | |
| Temperature Storage Range | -20 to +60℃ (90%RH or lower) | |
| Response Speed ※1 | 80m/min (42m/min) | 250m/min (100m/min) |
| Spindle drive method | Spring Compression (All Models) Air-driven through vacuum suction (DK805S*LR*) | |
| Origin Response Speed | With the same response speed as above | |
| Origin Position | Spindle movement ±0.5mm from 1mm position | |
| Protection Grade ※2 | Linear: IP67; Right-angle: IP64 (IP67 x 3) | |
| Vibration-resistant | 100m/s2 (20 ～ 2,000 Hz) | |
| Impact-resistant | 1000m/s2 (11ms) | |
| Power Voltage | DC 5V ±5% | |
| Power Consumption | 1W | |
| Output | A/B/Origin Differential Line Driver Signal (Compliant with EIA-422) | |
| Quality ※4 | Approximately 30g | |
| Sensor Head | Super-hard alloy ball with M2.5 installation screw | Steel ball surface, installed with M2.5 screws |
| Cable Length Output | 2.5m | |
| Accessories | 1 user manual, + 2 PM4×5 screws, set screw, wrench, O-ring 1 each installation pin (only for DK8**S*F**), 1 each soft tube elbow (only for DK8**S*L**), 1 each wrench | |
Phone Consultation