Are you familiar with the structural characteristics of cast iron镶copper square gate?

1. The cast iron镶copper square gate is composed of components such as the door frame, gate plate, guide rail, sealing strip, transmission screw, lifting block nut/lifting ear, and adjustable sealing mechanism. Both the door frame and gate plate are made of gray iron or spheroidal cast iron. The guide rails are symmetrically arranged on both sides and connected to the door frame ends with stainless steel bolts and locating pins (for gates with medium and small diameters, the guide rail can be integrated with the door frame during casting). The guide rail length is generally 1/2 to 1/3 of the full open height of the gate, ensuring a high overall structural strength, rigidity, wear resistance, corrosion resistance, and high load-bearing capacity.

2. Sealing is achieved through wedging with a wedge device; the sealing material is copper alloy or rubber, which has been processed and matched, resulting in good sealing properties.

3. The cast iron镶copper square gate is installed using pre-buried steel plates or bolts, making it easy to install, adjust, use, and maintain, with a long service life.

4. Offers a variety of specifications, with wide adaptability.

5. Used in conjunction with a lifting and closing machine, the gate serves as the working part, while the lifting and closing machine is the execution part for opening and closing the gate. The lifting and closing machine is driven by human power, an electric motor, or pneumatic and hydraulic mechanisms, which move the transmission mechanism's gears, worm gears, etc., to rotate the transmission nut or screw, causing the gate shaft to move vertically up and down, thus opening or closing the gate to achieve the purpose of water intake, closure, or water level regulation.