Application of Tunnel Steel Formwork

Steel formwork is widely used in concrete pouring construction. Depending on the purpose of the steel formwork, pouring molds can be assembled in various configurations of steel formwork, thereby forming composite steel formwork. Moreover, due to their high quality and frequent usage, steel formwork has gained extensive application.
Ensure precise altitude readings
During the construction process, templates should be installed to prevent displacement and protrusion. The basic side molds can be set outside the template support and secured. After the template installation, check its plane position, pitch height, and longitudinal and transverse stability to ensure it does not exceed the deviation.
During the installation process, set up anti-tilt facilities in the template.
Detailed preparation measures
Based on the location and elevation of this control template, lay it out, then periodically test the elevation of the points and adjust the high and low sections during the leveling process.
Steel formwork should be free of surface rust before installation and use, and the surface should be evenly oiled to ensure that the concrete surface removed is smooth and not adhered to the formwork.
Prevent plasma from leaking through the bottom