Panel Conveyor Manufacturer

I. Product Application

The wall panel installation machine is suitable for the installation of various upright panels such as cement boards, lightweight composite partition boards, and ceramic grain boards.

II. Product Features

The wall panel installation machine is equipped with a rotating support bearing and a rotating hydraulic motor. The fixture part can rotate 360 degrees like a wood grabber, allowing it to lift partition panels from a horizontal to a vertical position. The upright installation machine can both vertically install panels and move left or right parallelly to properly position the partition panels.

Three: The panel installation machine features full electric forward and reverse movement. The front wheels are dual-drive, while the rear wheels are dual-steering, offering flexible steering and a small turning radius. The panel installation machine is equipped with 4 gears: high speed, medium speed, and low speed. Additionally, there's a reverse gear. The speed is adjustable, allowing for quick or slow movement as desired. When aligning, use low speed for precision and ease of installation.

Four, the upright installation machine features a full-hydraulic operation of the clamping mechanism, offering a strong clamping force. The fixtures are equipped with anti-slip rubber pads to ensure that the heavy loads are securely held in place and do not slip. The lifting mechanism of the installation machine utilizes the forklift principle, providing ample power to lift up to 700 jin of ALC panels. The sliding mechanism allows the partition panels to move horizontally, quickly aligning the male and female grooves. Compared to other manufacturers' upright machines, it adds installation functionality, allowing a one-step transition from upright to installation, with full hydraulic automatic operation.