Wallboard Installer

I. Product Application

The wall panel installation machine is suitable for the installation of various upright panels such as cement boards, lightweight composite partition boards, and ceramsite boards.

II. Product Features

The wall panel installation machine is equipped with a rotating support bearing and a rotating hydraulic motor. The fixture part, similar to a wood grabber, can rotate 360 degrees, allowing it to lift partition panels from a horizontal to a vertical position. The upright panel installation machine can both vertically install panels and move horizontally parallel, positioning the partition panels correctly.

Three: The upright board installation machine features fully electric forward and reverse movement. The front wheels are dual drive wheels, while the rear wheels are dual steering wheels, allowing for flexible steering and a small turning radius. The upright board installation machine is equipped with four gears: high speed, medium speed, and low speed. Additionally, there is a reverse gear. Speed is adjustable, allowing for随意 fast or slow movement. For alignment, use the low speed, which provides accurate alignment and facilitates installation.

Four, the stand installation machine features a full-hydraulic clamping mechanism with high clamping force. The clamps are equipped with anti-slip rubber pads to ensure that the heavy loads do not slip. The lifting mechanism of the installation machine utilizes forklift principles, providing ample power to lift 700 jin of ALC panels. The sliding mechanism allows the partition panels to move horizontally, quickly aligning the male and female grooves. Compared to other manufacturers' stand machines, it adds installation functionality, from the stand to fully installed in one operation, with full hydraulic automatic operation.