ZG-0.5L Laboratory Mini Electric Water-Cooled High-Speed Mixing Mill
1. Compounding Room Volume: 0.5L. Main Motor: AC motor, power 3.7 kW
2. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication circulation system.
3. Rotor: Bi-convex, synchronous rotor design (can also be manufactured according to customer-provided rotor structure drawings), front-to-back rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized to meet customer requirements. Cast steel hardened treatment, surface chrome plated; ball roller bearings for bearings; bearing oil bath; rotor speed: 0.5L: 36 RPM; specific speed can be customized to meet customer needs.
4. Wall Treatment: Steel structure, drilling and heat treatment, hardened inner surface with hard chrome plating; Bracket: Steel structure, hardened inner surface with hard chrome plating.
5. Top栓: Cylinder-driven, surface hard-chrome plated. End face seal: high-wear-resistant material seal ring, self-lubricating bearing, hinge spring pressure-sealed
6. Feeding Hopper: Manual operation. Control Method: Operation available in manual and semi-automatic; Refining Machine Temperature: Room temperature to 300°, capable of high temperature up to 650°.
7. Base Bracket - Made from steel bars and steel plates,焊接并加工而成. Mixing Chamber - The middle slot is manufactured from wear-resistant alloy steel.
8. The side walls are made by welding medium carbon steel plates that have been processed. The stirrer shaft and blades are made of alloy steel.
9. Bushing made of ZG20 steel, roller bearings used for the bearing
10. Feeding Device - This machine is designed with a front feeding device, and the pressure can be adjusted at will by the user through the air valve.
11. Leak Prevention Device - The side end of the agitator shaft is equipped with a mechanical shaft seal, with a leak-proof structure that has received a certification.
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during blending operations, utilizing an air cylinder for vertical up and down movement.
13. Discharging Unit: Structure - pneumatic tilt in the mixing chamber. Tilt Angle: 110° to 135°. Tilt Power: Cylinder-driven
14. Transmission Structure: Main Motor 3.7KW AC Voltage 380V. Transmission Method: The main motor and the reducer are connected for transmission.
15. Air Compressor Pipeline: Compression Air Accessories (Three-point Assembly, Solenoid Valve) and Mechanical Body Pipeline
16. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. Features prompt actions, various timing settings, and capabilities for forward and reverse operation.
Advantages of the machine
17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The agitator shaft is made of alloy steel. The wear-prone areas are welded with imported German wear-resistant high-speed steel, providing enhanced durability and tightness.
19. Mixed Tank "Shan" type, the main body of the mixed tank is made of wear-resistant alloy steel and processed as a whole; the cutting section is surfacing with German high-speed steel.
20. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
21. The pressure cap features an "M" type structure for more even rubber material mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg
