ZG-0.5L Laboratory Mini Electric Water-Cooled High Shear Mixing Mill
Compounding chamber volume: 0.5L. Main motor: AC motor, 3.7 kW power.
2. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication recirculation system.
3. Rotor: Double-edged, synchronous rotor design (also available for custom manufacturing according to customer-provided rotor structure drawings), front-to-back rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball and roller bearings; lubrication bath for bearings; rotor speed: 0.5L: 36 RPM; specific speed can be customized as per customer request.
4. Walling: Steel structure, drilling and heat treatment, hard chrome plating on the inner surface; Bracket: Steel structure, hard chrome plating on the inner surface for hardening.
5. Top栓: Cylinder-driven, hard-chromium plated surface. End face seal: made of high-wear-resistant material, self-lubricating bearings, hinge spring pressing seal.
6. Filling hopper: manual operation. Control method: operation can be manual or semi-automatic; Refining machine temperature: room temperature - 300°C; capable of high temperature up to 650°C.
7. Base Bracket - Welded from steel beams and plates, processed into shape. Mixing Chamber - Middle slot made from wear-resistant alloy steel.
8. The side walls are made by welding medium carbon steel plates and then processed. The shaft and blades use alloy steel.
9. Bearing housing: Made of ZG20 steel, with roller bearings used for the bearing.
10. Feeding Equipment - This mechanical design features a front feeding device, with pressure adjustable via the user's gas valve as desired.
11. Leak Prevention Device: The side end of the agitator shaft utilizes a mechanical shaft seal clamp, with a leak-proof structure certified.
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing an air cylinder for vertical up and down movement.
13. Discharging Device: Structure - pneumatic tilting from the mixing chamber. Tilt Angle: 110°～135°. Tilt Power: Cylinder-driven
14. Transmission Structure: Main Motor 3.7KW AC Voltage 380V. Transmission Method: The main motor and the reducer are connected for integrated transmission.
15. Air Compressor Pipeline: Compression Air Accessories (Three-point Assembly, Solenoid Valve) and Mechanical Body Pipeline
16. Primary Electrical Control Equipment: Temperature settings: both automatic and manual options available. With alarm functions, various timing settings, and capabilities for forward and reverse operation.
Advantages of the machine
17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The stirrer shaft is made of alloy steel. The wear-prone areas are reinforced with imported German wear-resistant high-speed steel, making it even more sturdy and durable.
19. "Shan" Type Mixing Tank, the main body of the mixing tank is made of wear-resistant alloy steel, and the cutting section is welded with German high-speed steel.
20. Side wall leakage prevention device made with high-tech materials: leakage prevention structure certified
21. The pressure cap is designed with an "M" structure, ensuring more even rubber material mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg
