ZG-1L Laboratory Mini Electric Water-Cooled Extruder
1. Compounding Room Volume: 1L. Main Motor: AC motor, 3.7 kW power
2. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication recirculation system.
3. Rotor: Bi-angled, synchronous rotor structure (also available for custom design according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized to meet customer requirements. Cast steel heat treatment and hardening, surface hard chrome plating; ball roller bearings for bearings; bearing oil bath; rotor speed: 1L: 36 RPM; specific speed can be customized to meet customer requirements.
4. Wall Treatment: Steel structure, drilling and heat treatment, hardened inner surface with hard chrome plating; Bracket: Steel structure, hardened inner surface with hard chrome plating.
5. Top pin: Cylinder-driven, surface hard chrome plated. End face sealing: Sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressing seal.
6. Feeding Hopper: Manual operation. Control Method: Operation available in manual and semi-automatic; Refining Machine Temperature: Room temperature to 300°; capable of high temperature up to 650°.
7. Base: The stand is made of welded steel and steel plates after processing. Mixing Chamber: The middle slot is made from wear-resistant alloy steel.
8. The side walls are made by welding medium carbon steel plates and then processed. The shaft core and blades are made of alloy steel.
9. The bearing housing is made of ZG20 steel, with roller bearings used for the bearings.
10. Feeding Device - This machine is designed with a front-loading feeding device, and the pressure can be adjusted at will by the user through an air valve.
11. Leak Prevention Device - Mechanically sealed with a shaft seal at the side end of the agitator shaft; leak-proof structure certified
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing an air cylinder for vertical up and down lifting action
13. Discharging Device: Structure - Air-assisted tilting from the mixing chamber. Tilt Angle: 110° to 135°. Tilt Power: Cylinder-driven
14. Drive Structure: Main Motor, 3.7KW AC, Voltage 380V. Drive Method: The main motor and the reducer are connected for integrated drive.
15. Air Compressor Pipeline: Compressed air accessories (three-point assembly, solenoid valve) and mechanical body pipeline
16. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alarm functions, various time settings, and capabilities for forward and reverse operation.
Advantages of the machine unit
17. Key electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The agitator shaft is made of alloy steel. The wear-prone areas are welded with imported German wear-resistant steel, providing enhanced strength and durability.
19. Mixed tank in "Shan" shape, the main body of the mixed tank is made of wear-resistant alloy steel, with the cutting section surfacing with German锋钢.
20. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
21. The pressure cover utilizes an "M" type structure for more even rubber material mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg
