ZG-1L Laboratory Mini Electric Water-Cooled Compounding Machine
1. Compounding Chamber Volume: 1L. Main Motor: AC motor, power 3.7 kW
2. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication circulation system.
3. Rotor: Double-edged, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel quenching and tempering treatment, surface hard chrome plating; ball and roller bearings for bearings; bearing lubrication bath; rotor speed: 1L: 36 RPM; specific speed can be customized according to customer requirements.
4. Walling: Steel structure, drilled and heat treated, with hard chrome plating on the inner surface; Bracket: Steel structure, with hard chrome plating on the inner surface for hardening.
5. Top Pin: Cylinder-driven, surface-hard chrome plated. End face sealing: sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring-pressed sealing.
6. Filling hopper: manual operation. Control method: manual, semi-automatic; Refining machine temperature: room temperature - 500°
7. Base: The stand is manufactured using steel sections and steel plates, then processed. Mixing Chamber: The middle slot is made from wear-resistant alloy steel.
8. The side walls are made by welding medium carbon steel plates and then processed. The shaft core and blades use alloy steel.
9. Bearing Mount: Made of ZG20 steel, bearings are roller bearings
10. Feeding Device - This machine is designed with a front-loading feeding device, and the pressure can be adjusted arbitrarily by the user through the air valve.
11. Leak Prevention Device - The side end of the agitator shaft uses a mechanical shaft seal clamp, with a leak-proof structure certified.
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during blending operations, with the action of an air cylinder performing vertical up and down movements.
13. Discharge Device: Structure - pneumatic tilting discharge from the mixing chamber. Tilt Angle: 110° ~ 135°. Tilt Drive: Cylinder-powered
14. Transmission Structure: Main motor 3.7KW AC voltage 380V. Transmission Method: The main motor and reducer are connected by an integral transmission.
15. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping
16. Primary Electrical Control Equipment: Temperature settings: both automatic and manual options available. With alarm functions, various timing settings, and capability for forward and reverse operation.
Advantages of the machine unit
17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The stirrer shaft is made of alloy steel. The wear-prone areas are welded with imported German wear-resistant high-speed steel, offering greater firmness and durability.
19. "Shan" type mixing trough, the main body of the mixing trough is made of wear-resistant alloy steel, and the shearing section is surfacing with German sharp steel.
20. Side wall leak-proof device made with high-tech materials: Leak-proof structure certified
21. The pressure cover is designed with an "M" type structure for more even rubber material mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg
