ZG-3L Laboratory Mini Electric Water-Cooled High Shear Mixing Machine
1. Compounding Chamber Volume: 3L. Main Motor: AC motor, power 7.5 kW
2. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication circulation system.
3. Rotor: Double-edged, synchronous rotor structure (can also be designed and manufactured according to customer-provided rotor structure drawings), front and rear rotor speed ratio of 1:1.20 or ST synchronous rotor; specific parameters can be customized according to customer requirements. Cast steel quenching and tempering treatment, surface hard chrome plating; ball roller bearings for bearings; bearing lubrication bath; rotor speed: 7L: 36 RPM; specific speed can be customized according to customer requirements.
4. Walling: Steel structure, drilled and heat treated, with hard chrome plating on the internal surface; Bracket: Steel structure, with hard chrome plating on the internal surface for hardening;
5. Top栓: Cylinder-driven, hard chrome plated surface. End face sealing: Sealing ring made of high-wear-resistant material, self-lubricating bearing, hinge spring pressure-sealed.
6. Filling hopper: Manual operation. Control method: available in manual and semi-automatic options; Refining machine temperature: room temperature to 300°, capable of high temperature up to 650°.
7. Base: The frame is made by welding steel beams and plates, then processed. Mixing chamber: The middle groove is made of wear-resistant alloy steel.
8. The side walls are made by welding medium carbon steel plates that have been processed. The shaft center and blades are made of alloy steel.
9. The bearing housing is made of ZG20 steel, with roller bearings used for the bearings.
10. Feeding Equipment - This mechanical design features a front feeding device, with pressure adjustable via the user's air valve at will.
11. Leak Prevention Device - The side end of the agitator shaft uses a mechanical shaft seal clamp, with the leak-proof structure certified.
12. Pressure Cap Assembly - Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing an air cylinder for vertical up and down lifting movement
13. Discharging Device: Structure - pneumatic tilting from the mixing chamber. Tilt Angle: 110°～135°. Tilt Power: Cylinder-driven
14. Transmission Structure: Main Motor: 7.5KW AC, Voltage: 380V. Transmission Method: The main motor and reducer are connected for transmission.
15. Air Compressor Piping: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping
16. Main Electrical Control Equipment: Temperature Setting: Both automatic and manual options available. With alert functions, various timing settings, and capable of forward and reverse operation.
Advantages of the machine
17. The main electrical components are imported brands, with the whole machine bearings using Timken TWB brand.
18. The agitator shaft is made of alloy steel. Wear-prone areas are reinforced with imported German abrasion-resistant steel, offering greater tightness and durability.
19. Mixed Tank "Shan" type, the main body of the mixed tank is made of wear-resistant alloy steel and processed as a whole, the shearing part is surfacing with German high-speed steel.
20. Side wall leak-proof device made with high-tech materials: Leak-proof structure certified
21. The pressure cap features an "M" type structure for more even rubber compound mixing.
22. Volume: (W×D×H) 1150*500*1580MM
23. Weight: 365 kg