ZG-5L Laboratory Mini Electric Water-Cooled High-Speed Mixing Mill
1. Compounding Chamber Volume: 5L
2. Main Motor: AC motor, 11 kW power rating
3. Gearbox: Features a low-carbon steel structure base and frame, equipped with a forced lubrication recirculation system.
4. Rotor: Double-edge, synchronous rotor structure (also available for custom design according to customer-provided rotor structure diagram), front-to-back rotor speed ratio of 1:1.59 or ST synchronous rotor, cast steel hardened treatment, surface chrome plated; ball roller bearings for bearings; bearing lubrication bath; rotor speed: 5L: 36 rpm
5. Welded Steel Structure: Drilled and heat treated, with a hard chrome plating on the inner surface for hardening.
6. Bracket: Steel structure, internally hardened and treated with hard chrome plating.
7. Top Bolt: Cylinder-driven, hard chrome-plated surface
8. End Seal: High-wear-resistant material sealing ring, self-lubricating bearing, hinge spring pressure seal
9. Feed Hopper: Manual Operation
10. Control Methods: Manual and semi-automatic operation; Refining Machine Temperature: Standard temperature ranges from tap water to normal temperature to 300°.
11. Base, Chassis: Welded from steel beams and plates, processed into shape
12. Mixing Room: The middle trough is made of wear-resistant alloy steel, and the side walls are welded and processed from medium carbon steel plates.
13. Stirrer shaft: Alloy steel center and blades
14. Bearing Mount: Made of ZG20 steel, with roller bearings used for the bearing
15. Feed Device: This machine design features a front feeding device with pressure adjustable via an air valve as per user preference.
16. Leak Prevention Device: The side end of the agitator shaft is equipped with a mechanical shaft seal, with the leak-proof structure being certified.
17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, utilizing an air cylinder for vertical up and down movement.
18. Discharge Unit Structure: Hydraulic tilting from the mixing chamber. Tilt Angle: 110° to 135°. Tilt Power: Hydraulic dump truck
19. Transmission Structure: Main Motor: 11KW AC, Voltage 380V. Transmission Method: The main motor and reducer are connected for integrated transmission.
20. Air Compressor Piping: Compression air accessories (3-point assembly, solenoid valve) and mechanical body piping
21. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available, with prompt actions, various time settings, and capability for forward and reverse operation.
22. The main electrical components are of imported brands, with the whole machine bearings using Timken TWB brand.
23. The stirrer shaft is made of alloy steel. Wear-prone areas are welded with imported German wear-resistant steel, providing enhanced strength and durability.
24. "Mountain" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel, and the shearing section is surfacing with German high-speed steel.
25. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
26. The pressure cap is designed with an "M" type structure for more even rubber material mixing.
27. Volume: (W×D×H) 2000*980*2380mm
Weight: 2000 kg
