ZG-5L Laboratory Mini Electric Water-Cooled Compounding Machine

Volumetric Capacity of Compounding Chamber: 5L

2. Main Motor: AC motor, 11 kW power

3. Gearbox: Base and frame made of low-carbon steel structure, equipped with a forced lubrication circulation system.

4. Rotor: Double-edged, synchronous rotor structure (can also be designed and manufactured according to the customer-provided rotor structure drawing), front-to-back rotor speed ratio of 1:1.59 or ST synchronous rotor, cast steel quenching and temper hardening treatment, hard chrome plating on surface; ball and roller bearings for bearings; bearing lubrication bath; rotor speed: 5L: 36 rpm

5. Welded Steel Structure: Drilled and heat-treated, with internal surface hardened and chrome-plated.

6. Bracket: Steel structure, internal surface treated with hard chrome plating for hardening.

7. Top Bolt: Cylinder-driven, hard chrome plated surface

8. End Face Sealing: High-wear-resistant material sealing ring, self-lubricating bearing, hinge spring pressure-sealed

9. Feeding Hopper: Manual Operation

10. Control Methods: Manual, semi-automatic; Refining Machine: City water cooling

11. Base, Frame: Welded from H-beams and steel plates, processed into shape

12. Mixing Room: The middle trough is made of wear-resistant alloy steel, and the side walls are welded and processed from medium carbon steel plates.

13. Mixing shaft: Alloy steel for shaft core and blades

14. Bearing housing: Made of ZG20 steel, with roller bearings used for the bearing

15. Feed Unit: This mechanical design features a front-loading feed unit, with pressure adjustable via the user's gas valve to any desired setting.

16. Leak Prevention Device: The side end of the agitator shaft is equipped with a mechanical shaft seal clamp, with a certified leak-proof structure.

17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, with the action of an air cylinder for vertical up and down lifting.

18. Discharge unit structure: hydraulic tilting from the mixing chamber. Tilt angle: 110° to 135°. Tilt power: hydraulic dump body

19. Transmission Structure: Main Motor: 11KW AC, Voltage 380V. Transmission Method: The main motor and reducer are connected as an integral transmission.

20. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping

21. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available, with alert actions, various timing settings, and capability for forward and reverse operation.

22. The main electrical components are imported brands, with the entire machine's bearings using Timken TWB brand.

23. The agitator shaft is made of alloy steel. Wear-prone areas are welded with imported German abrasion-resistant steel, offering enhanced strength and durability.

24. "Mountain" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel and processed as a whole; the cutting section is surfacing with German high-speed steel.

25. Side wall leak prevention device made with high-tech materials: Leak prevention structure certified

26. The pressure cap features an "M" type structure for more even rubber compound mixing.

27. Volume: (W×D×H) 2000*980*2380MM

Weight: 2000KG