ZG-8L Electric Water-Cooled High-Speed Mixing Mill
1. Compounding Chamber Volume: 8L
2. Main Motor: AC motor, 22 kW power
3. Gearbox: Base and frame constructed with low-carbon steel structure, equipped with a forced lubrication recirculation system.
4. Rotor: Double-edge, synchronous rotor structure (also available for custom design according to customer-provided rotor structure drawings), front-to-back rotor speed ratio of 1:1.59 or ST synchronous rotor, cast steel quenched and tempered hardening treatment, surface hard chrome plating; ball and roller bearings for bearings; bearing oil bath; rotor speed: 8L: 36 RPM
5. Hard Chrome Plating: Steel structure, drilling and heat treatment, with internal surface hardening by hard chrome plating.
6. Bracket: Steel structure, inner surface hardened and chrome-plated.
7. Top pin: Cylinder-driven, hard chrome-plated surface
8. Face Seal: High-wear-resistant material sealing ring, self-lubricating bearing, hinge spring-tensioned seal
9. Filling hopper: Manual operation
10. Control Methods: Manual, semi-automatic operation; Refining Machine Temperature: Standard temperature ranges from tap water to normal temperature to 300°.
11. Base, Frame: Welded from H-beams and steel plates, processed into shape
12. Mixing Room: The middle groove is made of wear-resistant alloy steel, and the side walls are welded and processed from medium carbon steel plates.
13. Agitator shaft: Alloy steel shaft core and blades
14. Bearing Mount: Made of ZG20 steel, with roller bearings used for the bearing
15. Feeding Device: This mechanical design is a front-loading device, with pressure adjustable at will by the user via an air valve.
16. Leakproof Device: Mechanically sealed shaft packing is used at the side end of the stirrer shaft, with the leakproof structure certified.
17. Pressure Cap Assembly: Made of alloy steel, applies pressure to the raw materials during mixing operations, with the vertical up and down movement achieved by an air cylinder.
18. Discharge Unit Structure: Hydraulically tilting from the mixing chamber. Tilt Angle: 110° ~ 135°. Tilt Power: Hydraulic dump body
19. Transmission Structure: Main Motor: 22KW AC, Voltage 380V. Transmission Method: The main motor and reducer are connected for integrated transmission.
20. Air Compressor Pipe Fittings: Compressed air accessories (3-point assembly, solenoid valve) and mechanical body piping
21. Primary Electrical Control Equipment: Temperature Setting: Both automatic and manual options available, with prompt actions, various time settings, and capable of forward and reverse operation.
22. The main electrical components are imported brands, with the entire machine using Timken TWB brand bearings.
23. The stirrer shaft is made of alloy steel. Wear-prone areas are welded with imported German wear-resistant steel, offering enhanced strength and durability.
24. "Mountain" type mixing tank, the main body of the mixing tank is made of wear-resistant alloy steel and processed as a whole; the shearing section is surfacing with German high-speed steel.
25. Side wall leak prevention device made with high-tech materials: Leak-proof structure certified
26. The pressure cap is designed with an "M" type structure for more even rubber compound mixing.
27. Volume: (W×D×H) 2000*980*2380MM
Weight: 2000KG
