One:One-component platinum sulfonating agentMC-65MA one-component platinum-curing silicone vulcanizing agent, mainly used for low-temperature vulcanization and silicone products requiring odorless or thick formulations. Examples include: molded silicone pacifiers, cake platters, ashtrays, seals, and silicone pouches.PCPhone cases or thick silicone products, etc. The products vulcanized with the Mayten Platinum vulcanizing agent can be formed in one-shot curing.FDA Two-stage vulcanization can beLFGBCertification.
2: Advantages and Features of Single-Component Platinum Sulfurizing Agent (Compression Molding)
1. One-step vulcanization with environmental protection, odorless, and does not produce any new low molecular weight substances.
2. High hygiene level, capable of passing various existing certification standards such as:FDA、LFGBPlease wait.
3. Molded thick products reduce production costs due to increased output and lower electricity consumption with lower vulcanization temperatures.
4. Enhances the tensile strength, tear resistance, and resilience of silicone products.
5. Mayteng Company introduces advanced overseas production equipment and technology, with independent production and more competitive pricing.
6. Single-component use is simpler and saves rubber mixing time.
Three: Usage ratio for single-component platinum sulfide (compression): 1.0～1.5% (Note: The amount of addition may vary depending on the product; please add according to the actual amount needed).
Four: Single-component platinum sulfide curing agent (molded) silicone molded products, curing temperature: 125℃~160℃ (as per product requirement; if vulcanization temperature is below)125Please inform in advance (°C required).
Five: Vulcanization Instructions: Add the silicone in the specified amount, mix thoroughly, and it is ready for molding and vulcanization. The mixed material should be stored at a temperature not exceeding...25℃Within the space, and it is required that 48 Hour(s)72 Use within hours to prevent room temperature curing. (The mixing time for the specially formulated platinum sulfide may vary; please refer to the actual time.)
Six: Appearance of Single-Component Platinum Sulfur Promoter (Compression Molding) Product: Gel-like
Seven: Single-component platinum sulfonating agent (molding)ProductProduct Packaging: 1KG/Can/3KG/Bucket
Eight: Single-component platinum sulfide (molding) shelf life: refrigerated (-2 degrees Celsius)3month.
9: Notes for Single-Component Platinum Sulfurizing Agent (Compression Molding)
1Use platinum sulfur when dealing with products containing acetylene black, deep green, deep red, and other dark colors. The ratio may need to be adjusted accordingly.
2Please use platinum and sulfur, and do not add any raw materials containingN . P. S The presence of atomic or heavy metal elements (e.g., hydrogen sulfide, thioles) can cause a large number of needle-like voids on the product surface, and lead to incomplete vulcanization and sticking to the mold.
3. The temperature during the rubber curing process should not be too high., SuggestNo more than40℃,It is recommended to use ice water for circulating cooling in the extruder.. Exceptional performance.
4. Add Plated PlatinumA、B After Treatment, The item needs to be placed in an area where the temperature does not exceed25Within a space of ℃, and it must be48Hour～72HourAfter internal use, prevent room temperature crosslinking. If necessary to extend Shelf Life,Increase retardant as needed, to be purchased separately.(Our company offers this product.
Avoid high temperatures, direct sunlight, sources of fire, acidic substances, metal oxides, ammonia compounds, and flammable materials.
