Silicone has demolding properties and is difficult to bond with pressure-sensitive adhesives like double-sided tape. Our company produces...Slow-curing silicone treatment agentMW-222Effectively resolved this issue.,Ensures robust bonding between various double-sided adhesives and silicone products..This model is a universal type.Slow-curing silicone treatment agentStrong bonding strength, suitable for adhesive backings for various silicone products.
Slow-drying silicone treatment agentPerformance
Appearance: Transparent viscous liquid
Ingredients: Silicon Polymer, Curing Agent, Solvent
Environmental Protection: (ROHS,)REACHBisphenolAHalogen, ortho-phenyl
Slow-drying silicone treatment agentApplication Scope
Slow-dry silicone treatment agent MW-222 is widely used in self-adhesive silicone footpads, silicone foams, thermal conductive silicone, automotive interiors, aerospace interiors, household appliances and electronic equipment, and sealing strips.LEDLight strips, children's interlocking blocks, silicone accessories, etc. for adhesive application3MDouble-sided tape, removable adhesive.
Slow-drying silicone treatment agentUsage Instructions
Clean the oil, water, impurities, etc., from the surface of silicone products thoroughly..
2.TranslateMW-222Coated on surfaces of silicone products requiring adhesion,(If necessary, apply twice),Leave to dry for several minutes at room temperature (usually)1-3Minute(s).
3. Apply pressure-sensitive adhesive papers such as double-sided tape to the treated surfacesMW-222Silicone products,Apply moderate pressure to the contacting surfaces.
4Applicable3-5After several hours, the intensity reaches70-80%.24After several hours, the intensity reaches high..If the temperature is too low or the silicone concentration is30If the temperature is 8 degrees or below, the curing time needs to be extended.
Slow-curing silicone treatment agentStorage Method
Storage areas must be free of open flames, kept away from heat sources, and protected from static electricity, direct sunlight (exposure), and severe impacts; maintain a distance from fire sources, acidic, alkaline substances, and flammable materials. Adequate ventilation is required, and the room temperature should be stored below 30℃; avoid room temperatures directly exceeding30℃Above will greatly shorten the storage time. Product is volatile; seal the container after opening if any unused remains. Keep out of reach of children!
Slow-curing silicone treatment agentShelf Life: Unopened Container(≤30℃)Shelf life of storage6month
Slow-curing silicone treatment agentPackaging: 3-15-20kg/bottle18Or27KG/Piece(s).
