Equipment Introduction:
By the high-speed rotation of the dispersing disc, it generates strong shearing impact and friction between the material and the dispersing disc, achieving rapid emulsification, dissolution, uniform mixing, and dispersion; particularly suitable for the process of preparing paste for solid-liquid dispersion systems by uniformly dispersing powder in liquids.
This equipment is equipped with a hydraulic system, allowing the disperser to lift and lower vertically, and also features a 360° horizontal rotation capability.
Common Processes:
Dispersions: Paste for preparing solid-liquid dispersion systems, where insoluble solids or powders are dispersed in a liquid.
Solubility: Solution prepared by dissolving a solid or liquid in another liquid
Emulsification: The process of preparing an emulsion from two immiscible liquids
Mixed: A dispersion system is uniformly mixed with another dispersion system to prepare a new material.
Applicable Products:
Paints, inks, dyes, pigments, emulsions, resins, adhesives, agricultural chemicals, food, cosmetics, nanomodified coatings, biodiesel, coating slurries, extrusion slurries, molding slurries, textile auxiliaries, printing slurries, etc.
Component Parts:
Drive motor, belt drive, working part, hydraulic system, control system, drum cover, and other auxiliary components
Optional Features:
Bottle Capacity: 200L - 10,000L
Power Range: 4KW-132KW
Power Source: 380/400/415/440/480V; 50/60Hz; 3P
Motor Types: Standard, Explosion-proof, Variable Frequency
Energy Efficiency Grade: GB2 (IE3), GB3 (IE2)
Protection Ratings: IP54, IP55, IP65
Speed Regulation: Variable Frequency Speed Regulation, with Imported Brand Variable Frequency Inverter
Lifting Mechanism: Hydraulic Lift
Dispersal Trays: Flat toothed, Double-layer Dispersal Trays, Customized Double-layer Dispersal Trays, Other Custom Trays
Steering Mechanism: Manual, Electric, or No Steering Mechanism
Container Lid: Standard Swing Lid, Pneumatic Elevating Lid, Sleeve Lid, Sealed Vacuum Lid, Open Lid
Container Fixation: Manual Fixation, Automatic Fixation
Material: 304, 316L, 2205
Operation Panel: Standard Button Cabinet, Intrinsically Safe Explosion-Proof Button Cabinet, Flameproof Explosion-Proof Button Cabinet, Standard Touch Screen, Explosion-Proof Touch Screen
Electrical Control: Relay Control, PLC Control, Vector Control, Temperature and Pressure Detection, Actuator Closed-loop Control
Typical Parameters:
Model | Power （kw） | RPM （rpm） | Split disk diameter （mm） | Can Volume （L） | Hydraulic Power （kw） | Rising and falling stroke （mm） |
MFS-4-H | 4 | 1450 | 200 | 200 | 0.75 | 800 |
MFS-7.5-H | 7.5 | 1455 | 250 | 400 | 0.75 | 900 |
MFS-15-H | 15 | 1460 | 300 | 800 | 1.1 | 1100 |
MFS-22-H | 22 | 1470 | 350 | 1000 | 1.1 | 1200 |
MFS-30-H | 30 | 1470 | 400 | 1500 | 1.1 | 1300 |
MFS-45-H | 45 | 1478 | 450 | 2500 | 1.5 | 1600 |
MFS-55-H | 55 | 1482 | 500 | 3000 | 1.5 | 1700 |
MFS-75-H | 75 | 990 | 550 | 4000 | 2.2 | 1900 |
MFS-90-H | 90 | 990 | 600 | 6000 | 2.2 | 2000 |
MFS-110-H | 110 | 991 | 700 | 8000 | 3 | 2300 |
MFS-132-H | 132 | 991 | 800 | 10000 | 3 | 2400 |
Note:
The above typical parameters are based on a solid content of <30%, density of <1.3 g/cm³, and a full load material viscosity less than 1000 cp.
Materials with viscosity exceeding 10,000 cp are recommended to proceed to the medium to high viscosity material preparation equipment selection page.
Please specify your required processing volume, equipment type, size requirements, or the characteristics of the material you need to be processed, as well as the process. Mico's sales engineers will provide a satisfactory solution for you.
Key Features:
1. Attractive appearance, meticulous craftsmanship, imposing and generous, with strong visual appeal.
2. Compact and rational structure; easy installation, operation, and maintenance; stable performance, and safe and reliable.
High-quality raw materials, sturdy and durable.
4. Disassembling the dispersal disc is easy, and cleaning is convenient.
5. Variable frequency speed control, low energy consumption, recommend imported brand heavy-duty configuration.
6. Reduced air entrapment during operation; allows for rapid dissolution of materials at medium to high speeds, resulting in smaller secondary particles.
7. Multi-functional in one machine, the working head can switch between cylinders for operation in a short time, allowing for simultaneous configuration of 2-4 containers.
8. Features a design with a bucket lid to minimize solvent evaporation, reduce material loss, and save on environmental protection; achieves vacuum degassing and dehydration of materials.
9. Automatic control and temperature/pressure feedback system are available for safety assurance.
Highly customizable to meet various material characteristics, processing capacities, high-temperature and high-pressure conditions, flammability, explosiveness, as well as intelligent and digital requirements.
11. Strong production continuity, capable of 24/7 continuous operation.
