Low Loss: The product's no-load loss is reduced by over 30% compared to the SCB10 model, and the load loss is reduced by over 10% compared to the SCB11 model. It offers excellent energy-saving effects, operates economically, and requires no maintenance.

Low Noise: The noise level of the product is 10-15 decibels lower than the current standard J/T10088-2016 "Sound Level of Transformers for 6-220KV Grades."

Low partial discharge: The resin blend utilizes advanced mixing techniques from abroad and vacuum film degassing, ensuring thorough mixing and complete removal of air bubbles within the blend. The product has an extremely low partial discharge, controllable below 5PC. Both high and low voltage coils are cast under vacuum and pressure, providing full encapsulation and inter-coil impregnation properties for the resin insulation. The casting has a dense solidified structure, is flame-retardant, explosion-proof, and environmentally friendly.

The glass fiber and other insulating materials used in winding coils have an auto-extinguishing property, and will not produce arcs due to short circuits. Under high temperatures, the resin will not emit toxic or harmful gases.

High mechanical strength: Filled resin minimizes expansion coefficient differences within the casting, resulting in low curing shrinkage and internal stress. The cured material has high hardness. Within the encapsulation layer of the high and low voltage coil surfaces, there are pre-formed reinforcing materials placed, creating a dense structure akin to reinforced concrete. Therefore, the mechanical strength is even greater than pure epoxy resin and can withstand sudden short-circuit electromagnetic forces without damage.