Introduction:

Caked materialBundledThe machine feeds material in on one side and outputs it on the other, completing the vibration and dispersion of solidified materials in one go. It features a rational structure, easy operation, reliable performance, high efficiency, and easy maintenance, allowing for mobility with changes in work location. It improves labor efficiency and reduces the intensity of manual labor.

Usage Instructions

1. Placement: Must be placed before use.PackingThe machine is placed on the ground in a parallel position, ensuringBundledMachine balancing to prevent conveyor belt deviation.

2. Fixed: The two ground wheels below the export area are equipped with self-locking devices. Secure the two ground wheels before operation to prevent sliding.

3. Power supply: Simply connect the three-phase power to the distribution box (terminals 1-3 on the left side for three-phase power).

4. Switches: Before use, turn on all five switches in the electrical control box: front shock roller, rear shock roller, front vibration, rear vibration, and the main motor switch. Then, turn on the forward rotation switch (note: there is a C45 switch inside the control box that needs to be closed). Power on and observe that the conveyor belt is moving forward before use. If there is a bag jam, turn on the reverse rotation switch, and the conveyor belt will move backward to allow the bag to be removed.

5. Depending on the material's board condition, options include non-vibration or single vibration, controlled by the operator.

6. The pinion reducer and turbine reducer are pre-lubricated before shipment; simply power on for use.

7. Inspect the drive components before use and apply lubricant.