High-temperature resistant filter

The filter is mainly used to capture particles and suspended matter below 0.5 micrometers. It employs ultra-fine glass fiber paper as the filter material, with coated paper, aluminum foil, etc., serving as the separator plates, and is bonded with wooden frames and aluminum alloy. Each unit is tested by the sodium flame method, featuring high filtration efficiency, low resistance, and large dust capacity. Air filters are widely used in dust-free workshops for optical electronics, LCD liquid crystal manufacturing, precision instruments, beverage and food, PCB printing, and other industries. High filtration accuracy: The removal rate of suspended matter in water can reach over 95%, and it has a certain removal effect on large molecular organic matter, bacteria, colloids, iron, and other impurities. The treated water, after good coagulation treatment, has a filtration speed of generally 40m/h, up to 60m/h, which is over three times that of ordinary sand filters; large dirt-holding capacity: generally 15~35kg/m3, over four times that of ordinary sand filters; low backwashing water consumption rate: less than 1~2% of the cycle filter water volume; low chemical dosing, low operating costs. Simple and rational structural design, small footprint, easy installation and disassembly; short backwashing time, low pressure loss, and low water consumption; high filtration accuracy, suitable for various water quality filtration; equipped with an intelligent control system for remote control; equipped with motor overload protection for safety and reliability; continuous water supply during cleaning and drainage; long service life of the equipment, no need for replacement. High filtration accuracy: The removal rate of suspended matter in water can reach over 95%, and it has a certain removal effect on large molecular organic matter, bacteria, colloids, iron, and other impurities. The treated water, after good coagulation treatment, has an inlet of 10NTU and an outlet below 1NTU.