Product Details
Air shower, Goods shower, Transfer window, FFU, Supply air outlet, Rapid rolling shutter door, Negative pressure weighing room, Cleanroom workbench, Stainless steel sink, Cleanroom wardrobe, Cleanroom sampling vehicle, Stainless steel shoe cabinet
价 格Negotiable
最小起订0 Piece库存0 Piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Rapid roller shutter
Negotiable
Unpartitioned air filter
Negotiable
High-temperature resistant filter
Negotiable
W-Type Submicron Filter
Negotiable
Pass-through window
Negotiable
密褶式亚微过滤器
Negotiable
Home-use FFU Air Purifier
￥3000.00/Piece
Initial Efficiency Mother-Son Fra
Negotiable
W-shaped honeycomb activated carb
Negotiable
Flat Panel Pre-Filter
Negotiable
Sump Filter and Frame: The sealing methods include gaskets, vacuum sealing, and sump sealing. When using a gasket for sealing, typically closed-cell sponge rubber sheets or neoprene sheets are employed, and silicone rubber coatings can also be used for sealing. The thickness of the sealing material is usually 6
~8mm, the joint method of the sealing gasket is the same as that of the joint material for the flange connection of the air purification system duct, i.e., using trapezoidal or tenon joints. The sealing gasket is adhered to the frame of the liquid槽filter.
After installation, the compression rate of the sealing pad should be between 25% to 50%. When using a liquid trough for sealing, the liquid level in the trough should meet the design requirements, generally being...
2/3 slot depth, the melting point of the sealing fluid should be above 50°C, and there should be no leakage at any of the frame connections. During installation, immerse and insert the knife架mounted liquid槽filter into the sealing slot.
Phone Consultation