300KW Generator Rental

Diesel Generator Calculation Formula and Some Questions

Current = Power / Voltage / 1.732 * 1000
For example, the current calculation formula for a 100KW 400V diesel generator set should be:
　　100/0.8/400/1.732*1000=180.4
At 10,000V, the current calculation should be:
　　100/0.8/10000/1.732*1000=7.2
When it comes to calculating power for the current, its formula is:
Power = Voltage * Current * 1.732 * 0.8
For example, when the output current of a diesel generator set is 360A, its power calculation formula should be:
　　400*360*1.732*0.8/1000=199.5KW

Flywheel Housing: The 226B series diesel engine flywheel housing features internationally standard SAE1, SAEIII flywheel housing interfaces, and comes with matching flywheels and flywheel mounting plates, compatible with various generators both domestically and internationally.
Mechanical speed regulator: Utilizes AD fuel injection pump or EP9 fuel injection pump, enhancing the adjustment speed of diesel engines.
Electronic Throttle Controller: Configured with an electronic throttle controller model, the adjustment rate of the diesel engine can be less than 5%.
Fuel Filter: The fuel passes through two-stage filtration, ensuring its cleanliness and enhancing the reliability and lifespan of the diesel engine fuel supply system.
Fuel System: The fuel system of the Deutz 226B series diesel generators for power generation uses Type A multi-cylinder synthetic reinforced fuel injection pumps and closed porous fuel nozzles. The fuel is filtered through a two-stage fuel filter, ensuring the cleanliness of the fuel entering the injection pump and extending the service life of the pump. The P-type low-pressure atomizing nozzle improves the quality of fuel atomization.
Air Filter: Utilizing an air filter for intake ensures clean air, expands the application scope of diesel engines, and enhances the service life of the units.
Cooling System: The Deutz 226B series diesel engine cooling system for power generation employs a closed-loop design, forced water cooling, and a high-flow pump, enhancing the cooling capacity of the diesel engine and ensuring thermal balance requirements during operation.
Muffler: Reduces the noise level of the unit, ensuring compliance with environmental protection standards.
Engine starter: 24V electric start. Starts smoothly at -5°C. 12V electric start available upon special customer request.