Swivel diameter on bed: 500 mm

Workpiece Length: 1000 mm

Turning Length: 1000 mm

Swivel diameter on knife holder: 300mm

Center distance from spindle center to bed plane guide rail: 250 mm

Bore Diameter: 52 mm

Main shaft bore front taper Morse taper No. 6

Spindle Head Style - A6

Spindle Speed Ranges - Forward: 24; Reverse: 12

Spindle Speed Range: Forward 12-1680 rpm, Reverse 14-1580 rpm

Vertical Feed Range Varieties - 64

Vertical Feed Range - Standard Feed mm/r 0.08-1.59

Vertical Feed Range - Fine Feed - 0.028-0.054

Vertical Feed Range - Increased Feed - 1.71-6.33

Horizontal Feeding Range Types - 64

Horizontal Feed Range - Standard Feed mm/r 0.04-0.79

Horizontal Feeding Range - Fine Feed - 0.014-0.027

Horizontal Feeding Range - Increased Feeding - 0.86-3.16

Rack longitudinal rapid movement speed: 4 m/min

Quick traverse speed of the tool holder in the lateral direction: 2 m/min

Up/Down Blade Rack Travel (Small Blade Rack Travel/Transverse Blade Rack Travel) mm 140/320

Swivel Angle of Knife Holder - ±90°

Tool Bar Section Size (Square Tool Holder Tool Bar Section) mm 25×25

Spindle centerline to tool support face distance: mm 26

Bed end spindle diameter (tailstock sleeve diameter) mm 75

Bed end main shaft taper (tailstock sleeve taper) - Morse taper No. 5

Bed end main shaft stroke mm 150

Machine Tool Ball Screw Pitch mm 12

Metric Thread Range and Types: mm, 44 types; 1-192

British Standard Thread Range and Types per Inch (tpi) 21 types; 2-24

Modulus Thread Range and Number of Types: mm, 39 types; 0.25-48

Thread Pitch Range and Types: DP 37 types; 1-96

Bed Frame Rail Width (Rail Span) mm 400

Bed frame track hardness RC 52

Main Motor Power: 7.5 kW

Machine tool outline dimensions (Length x Width x Height) mm 3668×1037×1312

Machine Tool Packaging Dimensions (Length x Width x Height) mm: 3850×1520×2010

Processing Precision - IT7

Surface finish μm Ra 1.6