Our pyrolytic carbon black production line features microcomputer control, full automatic variable frequency drive, and vacuum production with zero pollution. It is an automated complete set of equipment suitable for the pyrolysis of used tires to produce carbon black.

Highlight Advantages:

1. Low energy consumption: Integrates ultra-fine crushing, impact crushing, and extrusion crushing, achieving up to 40-50% energy savings compared to other types of crushing machines.

2. High fineness: Equipped with an automatic分流分级 system, product fineness ≥ 325 mesh. (Raymond mill fineness can only reach below 300 mesh.)

3. Wide raw material range: particle size of raw material ≤ 10mm, only requires primary coarse crushing equipment for materials.

4. Low Wear: The crushing parts of the equipment use composite abrasion-resistant new materials, extending the service life.

High level of automation, strong stability, and easy operation.

6. Adhesive-Free: The granulation process uses physical principles to achieve a strong mixture and bonding of dust, carbon black, and water, without the need for any chemical adhesives.

7. Dust-Free Operation: This machine is a wet, vacuum, and continuous granulation system. No dust is emitted during the granulation process, and it is equipped with an exhaust gas dust removal device.

8. High Granulation Strength: This machine forces the powder material to agglomerate into spherical granules through the high-speed rotation of rotating parts equipped with agitating teeth. Compared to natural agglomeration granulation devices (such as rotary disk granulators, drum granulators), it boasts a more concentrated particle size distribution and granule strength exceeding that of naturally agglomerated granules.

9. High Granulation Rate: Granulation Rate ≥ 90%.

10. Aesthetically pleasing finished product: spherical granules with uniform size, sphericality ≥ 0.8, particle size typically 0.7-1.5mm.

11. Easy to Control: Particle diameter size can be appropriately adjusted through the material's moisture content and the main shaft speed.

12. High Efficiency: The machine has a compact structure, operates smoothly and reliably, with a high production capacity of 1-1.2 tons per hour (output may be affected by volatile content).

13. Labor-saving: High degree of mechanization, saving on labor, the entire production process requires only 4-5 people.

14. Strong mechanical stability: capable of continuous 24/7 production without downtime.

15. Less Land Area Required: Utilizing drum drying and double-layered structure, it features compact design and reduced land area, being half the space of a single drum dryer for the same output. It operates reliably with low energy consumption and high thermal efficiency.

16. Material drying is effective, finished product moisture content ≤2.5%.