Our pyrolytic carbon black production line is equipped with microcomputer control, full automation variable frequency drive, and vacuum production, ensuring zero pollution. It is an automated complete set of equipment suitable for the pyrolysis of used tires into carbon black.

Highlight Our Advantages:

1. Low energy consumption: Integrates ultra-fine grinding, centrifugal crushing, impact crushing, and extrusion crushing, achieving energy savings of up to 40-50% compared to other types of crushing machines.

2. High fineness: Equipped with an automatic self-flowing grading system, product fineness ≥ 325 mesh. (Raymond mill can only achieve fineness below 300 mesh.)

3. Wide raw material range: feed particle size ≤ 10mm, material only requires a primary coarse crushing unit.

4. Low-wear: The crushing parts use composite abrasion-resistant new materials, which have a long service life.

High level of automation, strong stability, and easy operation.

6. Adhesive-Free Granulation: The granulation process utilizes physical principles to strongly mix and bond dust, carbon black, and water, without the need for any chemical adhesives.

7. Dust-Free Operation: This machine features wet granulation, vacuum, and continuous granulation processes. No dust is emitted during granulation, and it is equipped with an exhaust gas dust removal unit.

8. High Granulation Strength: This machine forces the powder to agglomerate into spherical granules through the high-speed rotation of the rotating parts equipped with agitating teeth. Compared to natural agglomeration granulation devices (such as rotary disk granulators, drum granulators), it features a more concentrated particle size distribution and granule strength greater than that of naturally agglomerated granules.

High granulation rate: Granulation rate ≥ 90%.

10. Aesthetically pleasing finished product: spherical particles with uniform size, sphericality ≥ 0.8, particle size typically ranging from 0.7 to 1.5mm.

11. Easy to Control: Particle diameter can be appropriately adjusted through the material's moisture content and the main shaft speed.

12. High Efficiency: The machine has a compact structure, operates smoothly and reliably, with a high production capacity of 1-1.2 tons per hour (output is affected by volatile content).

13. Labor Savings: High level of mechanization, conserving labor; the entire production process requires only 4-5 people.

14. Strong mechanical stability: capable of continuous 24/7 production without downtime.

15. Low land occupation: Drying uses drum drying and double-layer structure, featuring compact structure and low land occupation, half the area of a single drum dryer of the same output. It operates reliably, with low energy consumption and high thermal efficiency.

16. Material drying is effective, finished product moisture ≤2.5%.