High Inclination Belt Conveyor

Advantages and Applications of Large Inclination Belt Conveyors:

Wave-shaped side edges, cross plates, and base belts form the conveying material"Valve"Container,Thus, achieve steep angle conveying.

Drive Unit: It is the power part of the conveyor, consisting ofYSeries electric motorsZJType shaft-mounted reducer, wedge-type brake assembly.

Transmission Drum: The main component for power transmission, the conveyor belt operates by friction with the transmission drum; this series of drums comes in both rubber-coated and smooth surfaces, with the rubber-coated drums designed to increase the adhesion between the drum and the conveyor belt..

Re定向 Rollers: Used to alter the running direction of the conveyor belt; Re定向 Rollers are for the under surface of the conveyor belt.

Belt tensioner wheel: Used to change the running direction of the conveyor belt, the belt tensioner wheel is used on the upper surface of the conveyor belt(Carrying surface).

Rollers: Used to support conveyor belts and the materials on them for stable operation, this series includes both upper parallel rollers and lower flat rollers..

Idler Rollers: Idler rollers are used to support the lower branch of the conveyor belt on the cambered section frame, resting on the free edges of the flanged conveyor belt on both sides. Several groups of idler rollers form an arc segment to redirect the conveyor belt, and they are supported by cantilever arms.

Vertical roller: Used to restrict the deviation of the conveyor belt,Mounted on the upper and lower transition frame, each frame equipped with4One, top, bottom - two each.

Tapping Wheel Cleaning Device:For beating the backside of the conveyor belt,Material shaken loose from the conveyor belt.

Tensioning device: Its functions include:1.Provide the conveyor belt with sufficient tension,Guarantee no slippage between the conveyor belt and the drive roller.2.Limit the sag between supporting points of the conveyor belt, ensuring smooth operation; this series uses a spiral tensioning device..

Rack, head funnel, head guard, feed channel, intermediate shelf, and intermediate shelf legs: Serve as support, dust prevention, and material guidance functions respectively in the conveyor..This series features three types of intermediate shelf legs: low, Chinese, and high. The lower horizontal section is only compatible with the low intermediate shelf leg, while the upper and lower horizontal sections depend on the specific head架.(Low, Chinese, and High Headstock)Each with different intermediate shelf leg configurations(Low, Chinese, and High Intermediate Shelf Stands).