High Inclination Belt Conveyor

High Inclination Belt Conveyor Advantages and Applications:

Wave-shaped side edges, cross plates, and base belts form the conveying material"Valve"Container,Achieve steep angle conveying.

Drive unit: It is the power part of the conveyor system.YSeries electric motorsZJType shaft-mounted reducer, wedge-type one-way clutch assembly.

Transmission Drum: The main component for power transmission, the conveyor belt operates through friction with the transmission drum; our series of transmission drums come in both rubber-coated and smooth surfaces, with rubber-coated drums designed to increase the adhesion between the drum and the conveyor belt..

Re定向 Rollers: Used to change the running direction of the conveyor belt, Re定向 Rollers are for the lower surface of the conveyor belt.

Idler Wheel: Used to alter the running direction of the conveyor belt; Idler wheels are used on the upper surface of the conveyor belt(Carrying surface).

Rollers: Used to support conveyor belts and materials on them for stable operation, this series includes upper parallel rollers and lower flat rollers in two types..

Tension roller: The tension roller supports the lower branch of the conveyor belt on the cambered frame, resting on the empty edges on both sides of the flanged conveyor belt. Several sets of tension rollers form an arc segment to redirect the conveyor belt, and the tension roller is supported by an overhanging arm.

Vertical roller: Vertical roller is used to restrict the deviation of the conveyor belt,Mounted on the upper and lower transition frame racks, each rack is equipped with4Individual, upper, and lower sections, each consisting of two..

Tapping Wheel Material Cleaning Device:Used for beating the backside of the conveyor belt,Material dislodged from the conveyor belt.

Tensioning device: Its functions include:1.Ensure sufficient tension on the conveyor belt,Guarantee non-slip between the conveyor belt and the drive roller..2.Limit the sag between conveyor supports, ensure smooth operation of the conveyor, this series utilizes a spiral tensioning device.

Rack, head funnel, head guard, feed chute, intermediate shelf, and intermediate shelf legs: Serve as supports, dust prevention, and material guidance in the conveyor..This series of middle shelf legs come in three heights: low, medium, and high. The lower horizontal segment is only compatible with the low-height middle shelf legs, while the upper and lower horizontal segments depend on the specific head bracket.(Low, Chinese, and High Head Blocks)Different intermediate shelf legs are provided.(Low, Chinese, and High Intermediate Shelf Leg).