High Inclination Belt Conveyor

Advantages and Applications of Large Inclination Belt Conveyors:

Wavy side edges, cross plates, and the base belt form the conveying material"Valve"Container,Thus, achieving a steep angle of conveying..

Drive Unit: The power component of the conveyor systemYSeries of electric motorsZJType shaft-mounted reducer, wedge-type ratchet assembly.

Transmission Drum: The main component for power transmission; the conveyor belt operates by friction with the transmission drum; this series of transmission drums is available in both rubber-coated and smooth surfaces; the rubber-coated drums are designed to increase the adhesion between the drum and the conveyor belt..

Directional Drum: Used to change the running direction of the conveyor belt, directional drums are used beneath the conveyor belt surface.

Take-up roller: Used to change the running direction of the conveyor belt, the take-up roller is used on the upper surface of the conveyor belt(Carrying surface).

Rollers: Used to support conveyor belts and materials on them, ensuring stable operation. This series includes two types: upper parallel rollers and lower flat rollers..

Roller carrier: The roller carrier supports the lower branch of the conveyor belt on the convex arc frame, resting on the free edges of the side conveyor belts, several groups of roller carriers form an arc segment to redirect the conveyor belt, and the roller carrier is supported by an overhanging arm.

Vertical Roller: The vertical roller is used to restrict the deviation of the conveyor belt.,Mounted on the upper and lower transition frame racks, each rack is equipped with4Individual, top, and bottom each two.

Tapping Wheel Cleaning Device:For beating the backside of the conveyor belt,Dislodge material stuck on the conveyor belt.

Tension device: Its functions include:1.Ensure the conveyor belt has sufficient tension,Guarantee non-slip between the conveyor belt and drive roller.2.Limit the sag between conveyor supports, ensuring smooth operation; this series utilizes a spiral tensioning device..

Rack, head funnel, head guard, feed guide, intermediate shelf, and intermediate shelf legs: respectively serve as support, dust-proofing, and material guidance in the conveyor..This series offers three types of intermediate shelf legs: low, Chinese, and high. The lower horizontal section is compatible only with the low intermediate shelf legs, while the upper and lower horizontal sections depend on the different head frames.(Low-profile, Chinese-style, and high-profile headstocks)Each with a different intermediate shelf leg(Low, Chinese, and high center shelf legs).